NooElec NESDR Nano 3 – Premium Tiny RTL-SDR w/ Aluminum Enclosure, 0.5PPM TCXO, SMA & MCX Input & Custom Heatsink. RTL2832U & R820T2-Based Software Defined Radio

Say goodbye to blocked USB ports! The tiny NESDR Nano 3 is the ideal SDR for portable and embedded applications. Quad SDRs on a Raspberry Pi? USB OTG? Not a problem for the NESDR Nano 3! The Nano 3 is just 17mm x 8mm x 20mm weighs only 15g!

The Nano 3 is built into a high-quality brushed aluminum enclosure. In conjunction with the 2 internal silicone heat pads, this ensures that heat is removed from board-level and to the exterior where it belongs. The aluminum enclosure ensures that EMI is kept out out of the sensitive SDR circuitry, and emissions from the digital circuitry are contained within the SDR enclosure. The latter is especially important in EMI sensitive environments like automotive and flight applications!

An articulating, right-angle female SMA connector is included to allow you to attach both male SMA and male MCX antennas directly to your SDR.

The NESDR Nano 3 contains the same custom TCXO we include in our NESDR SMArt series. This 0.5PPM, ultra-low phase-noise TCXO is by far the highest performance TCXO available in ANY low-cost SDR.

We are so confident of the reliability and stability of this SDR that we offer a full 2-year warranty–the longest in the industry.

CAUTION: The enclosure will get hot! This is by design, and will not affect performance of the SDR. Please be cautious when touching the SDR after prolonged usage! A custom heatsink, which can optionally be affixed to either side of the SDR to further improve heat dissipation, is included with your purchase.

This RTL-SDR is based on the R820T2 tuner IC made by Rafael Micro, which means an approximate tuning range of 25MHz-1700MHz . There is also an RTL2832U IC on board to provide basic demodulation and USB interface functionality.

Full compatibility with a wide variety of popular SDR software packages, such as Matlab, CubicSDR, HDSDR, SDR Touch, Stratux, Planeplotter for Windows, Mac, Linux, Android & Raspberry Pi.

Product Features

  • No more blocked USB ports! This RTL-SDR was designed into a tiny form factor to ensure proper fit within the smallest USB-compliant spacing. The Nano 3 is just 17mm x 8mm x 20mm & 15g!
  • The high-quality aluminium enclosure and silicone pads ensure that heat and stray EMI stay where they belong
  • The included articulating SMA connector allows for connection of both male SMA and male MCX antenna types without additional expenditures
  • The industry-leading 0.5PPM temperature-controlled crystal oscillator (TCXO) ensures that you will always be able to find the signal you need with absolute minimal drift and jitter
  • Proudly built in North America in our US & Canadian facilities. Full 2 year product warranty!

Click Here For More Information

NooElec NESDR SMArt XTR Bundle – Premium RTL-SDR w/ Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & E4000-Based Software Defined Radio

You spoke, we listened! This premium RTL-SDR was designed, developed and fabricated by NooElec in the USA and Canada in order to implement a wide array of feature requests. Compared to R820T-based devices, this E4000-based SDR excels at sensitivity at 1500MHz, and is capable of far higher frequencies, up to approximately 2350MHz. There is a small gap in frequency capability near 1100MHz. As such, we do NOT recommend this device for ADS-B usage. For ADS-B, consider NESDR SMArt, also available on Amazon.

For full product specifications, please visit our website at nooelec.com

Included:

✔ NESDR SMArt XTR SDR in silver brushed aluminum enclosure
✔ Antenna base w/ 2m RG58 cable
✔ Telescopic antenna mast (variable frequency capability)
✔ 433MHz (ISM) antenna mast (10.5″, fixed frequency)
✔ UHF antenna mast (4.5″, fixed frequency)

SDR Specifications:

✔ RTL2832U Demodulator/USB interface IC
✔ E4000 tuner IC
✔ 0.5PPM, ultra-low phase noise TCXO
✔ 2 RF-suitable voltage regulators
✔ Shielded primary inductor
✔ Integrated custom heatsink
✔ 2 silicone pads
✔ Female SMA antenna input
✔ High-quality silver brushed aluminum enclosure
✔ Frequency capability approximately 65MHz-2300MHz, with small frequency gap near 1100MHz

TCXO Specifications:

✔ Frequency stability: 0.5PPM (max)
✔ Phase noise @1kHz offset: -138dBc/Hz (or better)
✔ Phase noise @10kHz: -150dBc/Hz (or better)
✔ Phase noise @100kHz: -152dBc/Hz (or better)

Product Features

  • Premium RTL-SDR bundle includes NESDR SMArt XTR in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5′) RG-58 feed cable, and 3 antenna masts
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 separate RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi
  • SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6)
  • Proudly built by NooElec in the USA and Canada! Full 2-year product warranty

Click Here For More Information

NooElec NESDR SMArTee XTR SDR – Premium RTL-SDR w/ Extended Tuning Range, Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input. RTL2832U & E4000-Based Software Defined Radio

This premium RTL-SDR was designed, developed and fabricated by NooElec in the USA and Canada in order to implement a wide array of feature requests.

The integrated, highly-regulated 3.3v bias-tee is ready to power your RF accessories–no hardware or software modifications are required to activate the bias-tee. The bias-tee is protected by an automatically resetting fuse, to ensure your investment is safe from accidental short-circuits of the RF input.

Compared to R820T-based devices, this E4000-based SDR excels at sensitivity at 1500MHz, and is capable of far higher frequencies–up to approximately 2350MHz. There is a small gap in frequency capability near 1100MHz. As such, we do NOT recommend this device for ADS-B usage. For ADS-B, consider NESDR SMArt, also available on Amazon.

For full product specifications, please visit our website at nooelec.com

Included:

✔ NESDR SMArTee XTR SDR in silver brushed aluminum enclosure

SDR Specifications:

✔ RTL2832U Demodulator/USB interface IC
✔ E4000 tuner IC
✔ Integrated, always-on bias-tee (3.3V, 100mA max)
✔ 0.5PPM, ultra-low phase noise TCXO
✔ 2 RF-suitable voltage regulators
✔ Shielded primary inductor
✔ Integrated custom heatsink
✔ 2 silicone pads
✔ Female SMA antenna input
✔ High-quality silver brushed aluminum enclosure
✔ Frequency capability approximately 65MHz-2300MHz, with small frequency gap near 1100MHz

TCXO Specifications:

✔ Frequency stability: 0.5PPM (max)
✔ Phase noise @1kHz offset: -138dBc/Hz (or better)
✔ Phase noise @10kHz: -150dBc/Hz (or better)
✔ Phase noise @100kHz: -152dBc/Hz (or better)

Product Features

  • Premium software defined radio NESDR SMArTee XTR in a beautiful silver brushed aluminum enclosure
  • A wide variety of improvements on other designs, including integrated bias-tee, ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi
  • SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6)
  • Proudly built by NooElec in the USA and Canada! Full 2-year product warranty.

Click Here For More Information

NooElec NESDR SMArt – Premium RTL-SDR w/ Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.

You spoke, we listened! This premium RTL-SDR was designed, developed and fabricated by NooElec in the USA and Canada in order to implement a wide array of feature requests.

For full product specifications, please visit our website at nooelec.com

Included:

✔ NESDR SMArt SDR in black brushed aluminum enclosure
✔ Antenna base w/ 2m RG58 cable
✔ Telescopic antenna mast (variable frequency)
✔ 433MHz (ISM) antenna mast (fixed frequency)
✔ UHF antenna mast (fixed frequency)

SDR Specifications:

✔ RTL2832U Demodulator/USB interface IC
✔ R820T2 tuner IC
✔ 0.5PPM, ultra-low phase noise TCXO
✔ RF-suitable voltage regulator
✔ Shielded primary inductor
✔ Integrated custom heatsink
✔ Female SMA antenna input
✔ High-quality black brushed aluminum enclosure
✔ Through-hole direct sampling pads on PCB

Antenna Specifications:

✔ Wide base with super-strong magnet within base for easy mounting
✔ Low-loss RG58 feed cable
✔ 2m (6.5′) cable, twice as long as most low cost SDR antennae
✔ Heatshrinked male SMA connector for direct connection to the SDR or our other SMA-connected accessories like the Ham It Up

TCXO Specifications:

✔ Frequency stability: 0.5PPM (max)
✔ Phase noise @1kHz offset: -138dBc/Hz (or better)
✔ Phase noise @10kHz: -150dBc/Hz (or better)
✔ Phase noise @100kHz: -152dBc/Hz (or better)

Product Features

  • Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5′) RG-58 feed cable, and 3 antenna masts
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi
  • SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6)
  • Proudly built by NooElec in the USA and Canada! Full 2-year product warranty.

Click Here For More Information